Shutdown Mode

RobStaal

New member
Joined
May 31, 2021
Messages
2
Reaction score
3
Points
3
Location
Bergschenhoek
Grill
Ex4 and Q1000
Hi All,

i have my EX4 just a few weeks and for grilling and backing i like it a lot also the max. temp i like as i can make excellent pizza's :)
But there is always a but...
After grilling i first lower my temperature until around 90gr C and when it is lower i start the shutdown process.
I my case the fan starts stopping/running (pulsating) for around 10 to 15 min this is super irritating when you are still at the table.
Is this behaviour normal or does it with you guys just blows constantly , this to see if my unit is not behaving normal,
I have already latest firmware installed.

Thanks in advance for your wisdom :)

Rob
 
OP
RobStaal

RobStaal

New member
Joined
May 31, 2021
Messages
2
Reaction score
3
Points
3
Location
Bergschenhoek
Grill
Ex4 and Q1000
Thanks for that, i would have preferred that the fan was just blowing at a constant volume as that would be less irritating.
I will write on webers facebook a suggestion to adjust the fw to that mode if possible.
 
Top